Construction heating, ground thawing and dehumidifiers for hire
Ground thawing, construction heating and dehumidifying — we work out what you need.
Construction heating, ground thawing and dehumidifiers for hire. Whether you need to dig in frozen ground, keep concrete work going through the winter or dry out a building — we have the equipment and help you work out how much heat you need.
Thaw ground frost before you dig
Heatwork HW3600
Our workhorse through the winter. Circulates heated fluid in hoses laid out on the ground, so the frost thaws downwards instead of becoming a hard crust on top. Also used to keep concrete curing when temperatures are below zero.
| Use | Thawing ground frost, curing concrete, drying |
| Method | Heating hoses on the ground under insulation mats |
| Advantage | Thaws in depth — not just the surface |
Thawing mat 1,000 W, 1 × 3 m
For the smaller jobs where a full ground thawer is too much. Laid straight on the ground and connected to an ordinary power supply.
| Power | 1,000 W |
| Dimensions | 1 × 3 m |
| Use | Smaller areas — trenches, spot digging, steps |
Heat the building
Diesel heating gives the most output per krone and does not need a powerful power supply. Electric heating is quiet and exhaust-free, and is often the only option indoors.
Remko CLK 50–170 — 42 to 143 kW
Heavy-duty heaters in four sizes. We help you choose the right output based on volume and how airtight the building is.
| Power | 50, 70, 120 and 170 kW |
| Fuel | Diesel |
| Use | Large rooms, halls, buildings under roof |
| Connection | Hot-air duct to where the heat is needed |
Master diesel space heaters — 17 to 44 kW
Easy to move and quick to get going. The 17 kW model is infrared and heats surfaces and people directly instead of the air.
| Power | 17, 20, 29 and 44 kW |
| Fuel | Diesel |
| Operating time | Approx. 10–14 hours per tank |
| Use | Fast heat in smaller rooms and on building sites |
Remko ELT fan heater — 6 to 18 kW
Electric heating where exhaust fumes are not an option. Requires a three-phase circuit — check what you have available before you order.
| Power | 6, 9 and 18 kW |
| Power supply | 230 V and 400 V, three-phase |
| Use | Indoors — no exhaust, little noise |
Drying and dehumidifying
Remko LTE condensation dehumidifier — 50 to 80 litres
Draws moisture out of the air and collects it in a tank or straight into a drain. Works best at normal room temperature.
| Capacity | 50, 60 and 80 litres per day |
| Air flow | 380–490 m³/h |
| Use | Building drying, water damage, basements |
Elbjörn ASE desiccant dehumidifier
Where a condensation dehumidifier gives up — the desiccant dehumidifier works down to zero degrees and below. The right choice in unheated buildings in winter.
| Air flow | 210 and 300 m³/h |
| Type | Adsorption (rotor) |
| Advantage | Also works in the cold |
We work out what you need
The right output is about more than square metres — ceiling height, insulation, how many openings the building has and what you actually want to achieve. Too little heat costs you time, too much costs you fuel.
Call us and describe the building or excavation area, and we will work it out together. We have supplied heating for everything from cabin foundations to industrial buildings through many winters.
Practical
- Minimum hire is 1 day. Heating is often hired for weeks and months — ask about long-term rates.
- You cover the energy costs. Diesel according to consumption, electricity on your own meter.
- Insurance and return inspection are added to the rental price.
- We can deliver to you if you like — see transport.
- Hoses, cables and accessories are included — let us know how far you need to reach.
Not sure how much heat you need?
Call +47 948 87 000 and describe the building — floor area, ceiling height and how airtight it is. Then we will tell you which machine will do the job.