Drainage pumps for hire

Hoses in 1, 2, 3 and 4 inches are hired separately. Tell us how far and how high you need to pump, and we'll work out which pump will do the job. Dirty water with a lot of particles needs a pump with a larger solids passage.

Useful before you hire

• Minimum rental is one day. Weekend rental runs from Friday 15:00 to Monday 08:00, at a discounted price.
• Insurance and return inspection are charged in addition to the rental — see rental prices.
• Collect it yourself or have it delivered. We deliver throughout Norway — see transport.
• Instruction is included on collection and delivery. See also the rental terms.

Choose by how much water needs to go

Our pumps range from 170 to 1,740 litres per minute. The Intec LSC1.4s-51 low-level pump handles 170 litres and is for the last water on a floor. The Intec HS2.75S handles 230 litres, the Honda WX15T 280 litres and the Intec HS3.75SL 580 litres per minute.

The largest, the Intec KTZ 45.5, moves 1,740 litres per minute. It is for excavations and trenches with heavy inflow, where the small pumps can't keep up.

Clean or dirty water

Site water with sand and sludge wears out a pump. The HS3.75SL is made for exactly that: an impeller in hard-wearing urethane, an agitator that keeps particles moving, and it can run dry if the water runs out.

The Honda WX15T is made for clean and slightly contaminated water, not for sludge and gravel. It suits irrigation, moving water over longer distances, and ditches and manholes with relatively clean water.

Lift height, suction height and hose

The lift height (head) is the maximum height the pump can raise the water. The WX15T lifts up to 37 metres, the HS2.75S up to 18 metres and the HS3.75SL up to 10.8 metres. The closer you are to the maximum, the less water gets through, so tell us how high and how far you need to pump.

The submersible pumps sit down in the water. The WX15T stands on land and draws the water up from a depth of up to 8 metres. Hose is hired separately and must match the pump: 1 inch for the low-level pump, 1.5 for the WX15T, 2 for the HS2.75S, 3 for the HS3.75SL and 4 for the KTZ 45.5.

Electric or petrol

The HS2.75S, HS3.75SL and the low-level pump run on ordinary 230 V single-phase. The KTZ 45.5 needs 400 V 3-phase. Where there is no power, at the cabin or far out on the site, take the petrol-driven WX15T.

The WX15T weighs around 9 kg and the HS3.75SL around 20 kg, so one person can carry them. If you're digging a trench or excavation, you can hire a mini excavator and a pump from the same place.